| |
|
| |
Roll Forming |
|
| |
|
|
| |
ROLL FORMING OPERATION : |
|
| |
THIS OPERATION IS USED FOR " CURLING IN " OR "CURLING OUT" THE THIN WALLS. THIS IS THE LAST OPERATION TO SEAL THE ASSEMBLY. THIS IS ACHIEVED BY PRESSING THE ROTATING ROLLERS ON THE JOB. THE ROLLERS HAVE SUITABLE GEOMETRY TO ACHIEVE THE DESIRED CURLED SHAPE. THE APPLICATIONS ARE " TIE ROD ENDS","CAPACITORS", "PERMANENTLY SEALED GEARBOXES", "SLACK ADJUSTER", ETC. |
|
| |
|
|
| |
1. TIE ROD END (Curling In)
|
|
| |
 |
|
| |
|
|
| |
2. CAPACITOR (Curling In) |
|
| |
 |
|
| |
|
|
| |
3. SLACK ADJUSTER (Curling Out) |
|
| |
 |
|
| |
|
|
| |
4. ROLL FORMING HEAD |
|
| |
 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
